Our automatic door openers are designed to provide for easy opening and closing of interior and exterior doors for all users regardless of age, ability or disability. This model 4300 is intended for all commercial applications.
Included with 4300 Opener• Adjustable timed hold opener
• Stainless steel scuff plate
• Miscellaneous installation hardware
• On/off switch
• 9' power cord with three prong plug
• Bland latch stainless steel strike plate
• Two 61/2 inch intallationsafety decals
Installation Ease• Complete instructions are packed with every door opener
• No modification of the door or jambs is required
• Plugs right into a regular 115vac wall outlet
• Virtually maintenance free (a couple of drops of oil and a bit of grease every year is all it takes)
Versatile Applications• Fits in most interior and some exterior door applications
• Left and right hand door openers are available
• Jamb mount (push door open) or door mount (pull door open)
• Inverted model, for limited room above the door
• Deep reveal and door mounted door opener units for special applications
An Array of Companion Controls• Push Plate Wall Switches
• Push Button Wall Switches
• Touch Plate Wall Switch
• Coded Radio Transmitter/Receiver
• Keyless Entry Systems
• Electric Door Locks (Strikes)
• Door Closers
• Battery Back-up
Built in Safety Features• The door operator arm is not attached to the door. A wheel at the end of the door operator arm rolls against the face of the door, pushing the door open
• The door can always be opened manually from either side without involving the door operator
• Traffic flow is not hindered by the door operator
• Always used in conjunction with a conventional manual door closer, either surface-mounted or concealed
• A built-in load sensing circuit automatically stops the door operator arm and returns to the closed position if the door meets an obstruction.
• Thermally protected drive motor
• Hold-open time of the door is adjustable.
